No image? We're not online. Try back later.

SCSI Cases that work with Mac or PC

Cases | CDROM CDR CDRW | HDD

ATX Case (external multibay SCSI enclosure)

Add to Cart
$70.00



Brief instructions

All you have to do is install your peripherals inside the case.
Includes 50-pin SCSI ribbon cable to connect up to 5 devices, then just connect a SCSI cable from your computer (normally a DB25M to DB25M) and plug in the AC power cord and turn it on with one switch.
Has three 5.25 inch drive bays and three 3.5 inch drive bays or two floppy drives. Or can accomodate a full height (5.25") drive. This case is normally used for adding an ATX motherboard but works great for adding all your external components into one case. Case features include a
  • Quiet cooling fan
  • 250 Watt power supply
  • Dimension (D x W x H) :16 3/4" x 8 11/16" x 15 11/16"
  • Drive Space: 4 x 5.25" FDD; 2 x 3.5" FDD; 1 x 3.5" HDD
  • Slide-in, slide-out drawer module design.
  • Both sides open for easy access
  • Includes DB25 pin SCSI port
    Also see SCSI cables.
    This case can also be configured to your specifications. You can install the devices yourself or we can preinstall anything you like.
    Here is an example of what I use this type of case for:
    I have the ATX case configured as a multiple external SCSI unit. My case includes;
  • 2) 4GB Hard drives
  • 1) 2GB Hard drive
  • 1) CDRW
  • 1) Bernoulli drive
  • 1) Tape Drive
    As you can see I use all SCSI devices since I don't use USB as of yet, anyway. It sure makes more room on the tabletop since I have panorama monitors attached.

    • External CD-ROM Case/h3>

    Add to Cart
    $20.00

    		 Buying an internal CD-ROM but need an external one? We can install it for you with a purchase of a CD-ROM at no extra charge. Or you can just buy the external case separately. Case features include a quiet cooling fan, two Centronics 50pin ports and a power cord. Also see SCSI cables.
    CSC Corporate System Center
    1 inch external drive enclosure
    Add to Cart
    $25.00    		 External SCSI hard drive enclosure for low profile drives 1 inch in height or smaller.
    1/3-Height External HDD Case
    Add to Cart
    $35.00    		 Fits any SCSI hard drive 3 inches in height or smaller hard drives.
    Case features include a
  • quiet cooling fan
  • two Centronics 50pin ports and a power cord.
    Also see SCSI cables.

    • External ATX Multibay Case with accessories

    or an

    External ATX Multibay Case without accessories $59.99
    Add to Cart
    $150.00
    More INFO

    Multiple Bay External SCSI Case LOADED Equipped with:
  • 2) 150MB Bernoulli Drives
  • 1) 4GB Seagate Drive (ST43400N)
  • 1) 5GB Seagate Drive (ST15150N)
  • 4) 150MB Bernoulli Disks
  • 1) Active Terminator
  • 1) AC Power Cord
  • Case features include a
  • Quiet cooling fan
  • Two C50 SCSI ports
    Also see SCSI cables.

    All you need to do is connect a SCSI cable from this case to your computer, plug in the AC power cord and your ready to startup.
    • Bernoulli Dual Unit 150MB Storage System

    Also see other Bernoulli cases & drives


    Add to Cart
    $65.00
    More INFO.
    The case itself can accomodate two Bernoulli's, CDROM, CDR, CDRW or any 5.25 inch device. This case is equipped with two 150MB Bernoulli drives and you get 2 new blank Bernoulli disks with it. Case features include:
  • Quiet cooling fan
  • Power supply
  • SCSI selector switch
  • Two C50 SCSI ports
  • AC power cord
    Also see External SCSI cables.

    • Full-Height External HDD Case

    Fits full-height (5.25") drives.
    Case features include a

    • quiet cooling fan
    • two Centronics 50-pin ports and a power cord.
      Also see SCSI cables.
    		  Add to Cart
    $25.00
    Back one page